Indoor and outdoor full-color LED display in summer heat dissipation such as solution

Time:2018-10-30 Views:884

How to solve the heat dissipation problem?

1. For the area north of guangdong, no air conditioning is recommended for the LED display with less than 20 square meters. If conditions permit, it is enough to use two small fans.

2. Some cities in the south: guangdong, guangxi, hainan, wuhan, chongqing and other places need to install two fans fully enough. If the diameter of the fans is about 500mm, it can be determined according to the size of the installation space.

Indoor full-color LED display

How does an LED display with more than 20 square meters dissipate heat

3. If the installation position of the LED display is against the wall, see how much the LED display can protrude. If it can protrude one meter from the wall, it is suggested to select the fan according to the area size.If the customer purchases an 80-square-meter P16 outdoor LED full color screen, he/she should choose 6 axial fans with a diameter of about 600mm.It is important to make sure that the fan is pumped out and equipped with a protective screen to prevent the technician from taking in the clothing and causing personal injury while repairing the screen.Additional, the fan outlet that wants to be on outside aluminium model board installs the shutter of aluminium alloy, can achieve waterproof effect.

The full-color LED display on the wall can also be installed with air conditioning. The main engine of the air conditioner should be installed and placed without affecting the overall appearance of the wall.The selection of air conditioners is required. The most commonly used air conditioners are 1.5p, 2P and 3P.Southern city USES 9 square 1P air conditioning calculation.If the outdoor display area of the LED is relatively large, the air conditioner will be ordered directly by the manufacturer. If the area is not large, you need to go to the boutique to buy it.

4. If the installation of the LED display screen adopts the column, it is better to use the fan to dissipate heat. The fan is installed on the aluminum plastic plate at the back of the big screen, and it is better to move up and make it into a shutter, so that rain doesn‘t enter the screen when it rains.If it is a double column, open a few shutters in the middle of the double column. This window is the air intake, and the fan above is the air outlet. In this way, complete air convection can be formed to make the heat dissipation better.

The maintenance scheme of full-color LED display, one of the measures to do well in cooling, the other is to avoid improper operation.It is generally recommended to have a fan or air conditioner to enhance the cooling function.